Operating Instructions

- 11 -
III - SETTINGS
Set Up Wi-Fi Connection
Make Wi-Fi Connection In Settings  Wireless & networks  Wi-Fi Settings, check on
the Wi-Fi to turn on the Wi-Fi.
Normally, the device will automatically scan the available Wi-Fi Access Point (AP). If this
does not happen, press Menu (upper right corner icon in the Status bar) and select
Scan to scan for the available Wi-Fi APs. Then, tap on the desired AP to make the
connection. If it is a secured AP, system will prompt you for the password. Enter it by
tapping on the password entry line, and use the onscreen keyboard to enter the
password. Then, tap on the Connect to start connecting to that AP.
When connection is established, the Wi-Fi connected icon will show up on the
status bar.