User Manual

Shenzhen Waytronic Electronics Co., Ltd. MicroSound V16.02
4. Panel introduction
1
4
2
5
3
6
7
Note: when recording, shall start to record what you need after hearing a “di” sound.During its recording, long
press the recording button all the time. To save the recorded voice completely, after finishing recording, wait a
moment,then release the recording button.
5. Installation and user guide
5.1 Installation Requirements
1) Shall be installed indoor, not recommended for outdoor applications.
2) Do not be installed near the high-power electrical appliances and switching devices.
3) Do not be installed under or next to the air conditioner.
4) Do not be installed in the environment with large temperature change. There shall be no heat source in front of
the detection direction. Otherwise, the machine will give false alarm.
No.
Function
Function introduction
1
Inductive probe
Human body inductive probe
2
Indicator light
Recording and playing indicator
3
Button A
Long press 3s, start to record when hearing a “di” sound; release
button and stop recording hearing a “di” sound.
4
Power/volume switch
To the bottom is switch off; to the middle is switch on and one
level volume; to the top is the 2nd level volume.
5
Recording hole
Microphone recording hole
6
Button B
Short press to play; press again to stop.
7
Speaker
Sound output