Owner`s manual

Page 11
STEP 4: Once you have found the right code
number and the component has turned off, press the
POWER button on the URC-SR3 remote to turn the
component back on.
Next test the VOLUME and CHANNEL buttons (or
PLAY and STOP buttons for DVD) to make sure they
all work. If any of the buttons do not work properly,
you need to find a new code. Continue pressing the
UP

(or DOWN

) arrow button until you find a
new code that turns off the component and makes the
VOLUME or PLAY buttons respond correctly.
STEP 5: Once you have found the right code, you
must save it. Press the component button you just
programmed (in this case TV) one more time to save
the code number. The component LED light will blink
two times to confirm that the code was successfully
stored. Now when you press the TV component
button, all of the buttons will work with your TV.
NOTE: Use this method for those components you
cannot program with either the Quick Set-Up or 3-
digit Code Entry Methods.
IMPORTANT: If you cannot find the right code after
5 minutes of trying the Auto-Search Method, try the
Learning Method (page 12).
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER
IF YOU NEED ASSISTANCE, E-MAIL
[e-mail]
or dial 1-800-901-0800
(9:00AM-6:00PM EST)