Owner`s manual

Page 14
Special Advanced Features
Programming Automated Activities
The URC-SR3 has six Macro buttons (POWER, ALL
OFF, A, B, C, D) that are designed to store up to 20
commands in each button. Pressing any one of the
Macro buttons, or Automated activity, will send out
the series of commands that are stored in that
particular button.
MacroPower™ Total ALL ON/OFF
MacroPower makes several devices work together by
pressing one button. Imagine the convenience of
turning on your TV, your DVD player and your
CBL/SAT receivers by pressing a single button on your
URC-SR3. What could normally take three remotes and
three button pushes, the URC-SR3 can accomplish with
the press of one button. We call that MacroPower. Any
of the Power or the All Off buttons can be programmed
for MacroPower control. To set it up, follow these easy
steps:
STEP 1: To program MacroPower commands for the
Power ON button, press the POWER button and the
SELECT[SEL] button at the same time for 2 seconds
until one of the component button LED lights turns on.
IMPORTANT: You have 30 seconds to perform the
next step while you are in programming mode. If you
do not press a button within 30 seconds, the compo-
nent LED light will turn off. The remote will exit the pro-
gramming mode and you will have to start over.
POWER
SELECT
BUTTON