Owner`s manual

Page 16

Programming “My Button” Custom

Programmable Button

Automatically turn on TV to your favorite channel!

Always begin watching TV on the channel you like

best - you can preset this button with a few simple

steps.

In cable mode, My BUTTON will automatically turn

on TV to your favorite channel. To program this

feature.

STEP 1: Press the CBL button to select the Cable

mode.

STEP 2: Press the My BUTTON and the SELECT[SEL]

button at the same time for 2 seconds until the CBL

component LED turns on.

IMPORTANT: You have 30 seconds to perform the

next step while you are in programming mode. If

you do not press a button within 30 seconds, the

component LED light will turn off. The remote will exit

the programming mode and you will have to start

over.

STEP 3: Using the Number Pad, punch in the

Channel number of the channel that you want to

store on the My BUTTON. The Cable component LED

light will blink once for each button pressed.

STEP 4: Press the CHANNEL UP button to store the

commands entered. The CBL component LED will

blink three times to confirm the programming.

SELECT

BUTTON



BUTTON