Owner`s manual

Page 17

Programming “My Favorites” - Favorite

Channel Buttons

In Cable mode, the A, B, C, D buttons are also

designed to serve as dedicated Favorite Channel

buttons. Each button will access one of your favorite

channels with just one button press. Here’s how to

program Favorite Channels:

STEP 1: Press the CBL button to select the Cable

mode.

STEP 2: Press the ‘A’, ‘B’, ‘C’ or ‘D’ button and the

SELECT[SEL] button at the same time for 2 seconds

until the CBL component LED turns on.

IMPORTANT: You have 30 seconds to perform the

next step while you are in programming mode. If you

do not press a button within 30 seconds, the

component LED light will turn off. The remote will exit

the programming mode and you will have to start

over.

STEP 3: Using the Number Pad, punch in the

Channel number of the Favorite Channel that you

want to store in the Macro button. The Cable

component LED light will blink once for each button

pressed.

STEP 4: Press the CHANNEL UP button to store the

commands entered. The CBL component LED will

blink three times to confirm the programming.

BUTTON

SELECT

BUTTON

