Owner`s manual

Page 19
SimpleSound™ Total System Volume
Control
SimpleSound is one of the most exciting features of
the URC-SR3. It gives you total volume control over
ALL the components in your system, even those that
do not have built--in volume control, such as TIVO,
DVD and DVR. SimpleSound saves you the hassle
and inconvenience of constantly switching between
component modes just to control volume.
First you should identify which device in your system
will be used to deliver sound. In a basic system, the
sound may come from your TV speaker. In a more
advanced system, the sound may come from your
audio components (such as a Surround Sound
Receiver or Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that corresponds
to the Component you want to add volume control to
(DVD) and the SELECT (SEL) button at the same time
for about three seconds until the component LED light
turns on.
IMPORTANT: You have 30 seconds to perform the
next step while you are in programming mode. If you
do not press a button within 30 seconds, the
component LED light will turn off. The remote will exit
the programming mode and you will have to start
over.
COMPONENT
BUTTONS
SELECT
BUTTON