Owner`s manual

Page 20
STEP 2: Press the VOLUME UP button and then
press either the TV component button that you want
to use for volume. The Component LED light will blink
two times to confirm that it is saved. This sets up three
buttons (Volume Up, Volume Down and MUTE) as a
group for that component.
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what’s technically referred to
as a “Punch Through” feature and is not limited to
volume control. It can also be applied to other
groups of buttons. If you find yourself switching to a
particular component mode frequently to access a
particular control, consider using “Punch Through”.
VOLUME
UP