Owner`s manual

Page 26

ALL OFF

POWER

NOTE: To erase other Macros, simply press the

appropriate button in Step 1 in combination with the

SELECT[SEL] button.

Erasing MacroPower & Other Macro

Commands

STEP 1: To erase MacroPower commands on the

POWER or ALL OFF button, press and hold either the

POWER or ALL OFF button and the SELECT[SEL]

button simultaneously for two seconds until the

current status component LED turns on.

IMPORTANT: If you don’t proceed to the next step

within 30 seconds, the LED will turn off and exit set-

up mode and you will need to start over.

STEP 2: Press the CHANNEL UP button to erase and

exit Erase mode. The component LED light will blink

two times to confirm the erasure.



SELECT