Owner`s manual

Page 7
Programming URC-SR3 using
Pre-Programmed Codes
There are three different ways you can program your
URC-SR3 using the component brand codes that are
pre-programmed into the remote. One of these will
work for you!
• Quick Set-Up Method
• Three-Digit Code Entry Method
• Auto-Search Method
* * *
TRY THIS FIRST!
Quick Set-Up Method
STEP 1: Manually or using your old remote, turn on
the component you want to program—for example, to
program your TV, turn on your TV set.
STEP 2: Point the URC-SR3 toward the component
that you want to program (in this case the TV set) and
press and hold the component button (in this case the
TV button). While holding down the component
button, begin to press numeric keys, one number at a
time, starting from 1, continuing to 2, 3 ... 0 until
component (in this case the TV) turns off.
STEP 3: Release the component button to save the
code. The component LED light will blink two times to
confirm that the code has been stored.
Repeat the above three steps for other components.
COMPONENT
BUTTONS
NUMBER
PAD