SDS

ManualsBrandsWD-40 ManualsTools & Hardware3-in-1 3 oz. Multi-Purpose Precision Lubricant Liquid Oil

Page 1 of 4

Safety Data Sheet

1 - Identification

Product Name: 3-IN-ONE® Telescoping Spout

Multi-Purpose Oil

Product Use: Lubricant

Restrictions on Use: None identified

SDS Date Of Preparation: 07/31/2014

Manufacturer: WD-40 Company

Address: 1061 Cudahy Place (92110)

P.O. Box 80607

San Diego, California, USA

92138 –0607

Telephone:

Emergency only: 1-888-324-7596 (PROSAR)

Information: 1-888-324-7596

Chemical Spills: 1-800-424-9300 (Chemtrec)

1-703-527-3887 (International Calls)

2 – Hazards Identification

Hazcom 2012/GHS Classification:

Not hazardous

Note: This product is a consumer product and is labeled in accordance with the US Consumer Product

Safety Commission regulations which take precedence over OSHA Hazard Communication labeling.

Label Elements:

None Required

3 - Composition/Information on Ingredients

Ingredient

CAS #

Weight Percent

US Hazcom 2012/ GHS

Classification

Severely Hydrotreated Heavy

Naphthenic Oil

64742-52-5

>97

Not hazardous

Naphtha, petroleum

64742-47-8

Aspiration Toxicity Category 1

Non-Hazardous Ingredients

Mixture

Not Hazardous

Note: The exact percentages are a trade secret.

4 – First Aid Measures

Ingestion (Swallowed): While aspiration is unlikely due to viscosity, DO NOT induce vomiting. Call

physician, poison control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.

Eye Contact: Flush thoroughly with water. Get medical attention if irritation persists.

Skin Contact: Wash with soap and water. If irritation develops and persists, get medical attention.

Inhalation (Breathing): If irritation is experienced, move to fresh air. Get medical attention if irritation or other

symptoms develop and persist.

Signs and Symptoms of Exposure: May cause mild eye irritation. Prolonged or repeated skin contact may

cause mild irritation and defatting dermatitis.

Indication of Immediate Medical Attention/Special Treatment Needed: Immediate medical attention is

needed for ingestion.

5 – Fire Fighting Measures

Suitable (and unsuitable) Extinguishing Media: Use water fog, dry chemical, carbon dioxide or foam. Do

not use water jet or flooding amounts of water. Burning product will float on the surface and spread fire.

Specific Hazards Arising from the Chemical: Slightly combustible liquid. If heated above the flashpoint, will

release flammable vapors that can present a fire or explosion hazard.

Summary of content (4 pages)

PAGE 1
Safety Data Sheet 1 - Identification Manufacturer: WD-40 Company Address: 1061 Cudahy Place (92110) P.O.
PAGE 2
Special Protective Equipment and Precautions for Fire-Fighters: Firefighters should always wear positive pressure self-contained breathing apparatus and full protective clothing in areas where chemicals are used and stored. Cool fire-exposed containers with water. 6 – Accidental Release Measures Personal Precautions, Protective Equipment and Emergency Procedures: Wear appropriate protective clothing (see Section 8). Eliminate all sources of ignition and ventilate area.
PAGE 3
Evaporation Rate: Open Cup Not Determined Flammability (solid, gas) Not applicable Temperature: Decomposition Temperature: Viscosity: VOC: 0% Pour Point: Not Determined 112 SUS (23.31 cSt) @ 100F Not Determined 10 – Stability and Reactivity Reactivity: Not reactive under normal conditions Chemical Stability: Stable Possibility of Hazardous Reactions: May react with strong oxidizers generating heat. Conditions to Avoid: Avoid heat, flames and other sources of ignition.
PAGE 4
15 – Regulatory Information U.S. Federal Regulations: CERCLA 103 Reportable Quantity: This product is not subject to CERCLA reporting requirements, however, oil spills are reportable to the National Response Center under the Clean Water Act and many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations. SARA TITLE III: Hazard Category For Section 311/312: Non-Hazardous.