User's Manual

Eleksen Connected Worker Operating Manual
Document 1
-
Version
4
1
1
/
12
/
19
1. Touch ICEid tag against rear of Hub in area shown
2.
Hub screen Displays worker ID
Haptic Sounder
NOTE: If worker ICE id is not peformed within approximately eight minutes the Hub will go into sleep
mode to preserve battery life. If the Hub enters sleep mode please refer to 3.2.6 to re-activate the Hub
and then return to 3.2.3
3.2.3 Connect devices to Hub using device ICEid tag/s
Continue to add devices as shown above.
The Screen will identify the devices attached and count the total number of devices paired with the
Hub. When all devices are attached then attach the garment to the Hub.
3.2.4 Connecting Hub to garment
When garment is plugged into the Hub LED’s will flash green
Haptic Sounder
OLED Screen