Installation Guide

©2015 KNAACK LLC
3
Extension
1450
(1-1/2” square tube)
Ladder Strap
1450/1475
Extension 1475
(1-3/4" square tube)
Front Mounting Bracket
1450/1475
Ford F-150 Adapter
1450/1475
Front Leg Socket
1450/1475
Front Leg Socket
1450/1475
Rear Mounting Bracket
1450/1475
Upright
1475
Upright
1450
Ladder Stop
1450/1475
STEEL WEEKENDER®
RACK ASSEMBLY
BLIND FASTENER INSTALLATION
Place a drop of oil on black oxide bolt for lubrication before assembling.
Place the Blind Fastener in the hole and use 1/2" or 7/16" wrench to
tighten black oxide bolt until fastener is fully seated (it will start out hard
and get easier as fastener “bulbs” out).
Make sure the Blind Fastener and Installation Tool do not turn during
installation.
Black Oxide Bolt
Flat Washer
9/16" Wrench
Installation Tool
Blind Fastener
ALUMINUM TRUCK BED INSTALLATION
Coat drilled holes with Zinc Rich Primer. Insert Blind Fastener through one
1/2" x 1" plastic washer. Insert Blind Fastener into drilled hole. Place
second 1/2" x 1" plastic washer through the bottom of the Blind Fastener.
Continue following installation instructions above to install Blind Fasteners.