Assembly Instructions

USER INSTRUCTIONS
Page 15
STEP 11 - POSITION AND SECURE LADDER RACK ASSEMBLY
Insert the handle into the rear coupler and ensure there is sufcient
clearance between the back of the vehicle and the handle for full rotation.
If more or less clearance is desired slide the rack forward or backwards in
the mounting channels. Once the desired position is found, torque all 1/4”
nuts to 8 ft-lbs to lock the position of the rack.
SPACING SHOULD BE
BETWEEN 3-8"
STEP 10- POSITION AND SECURE LADDER RACK ASSEMBLY
INSERT THE HANDLE INTO THE REAR COUPLER AND ENSURE THERE IS SUFFICIENT CLEARANCE BETWEEN
THE BACK OF THE VEHICLE AND THE HANDLE FOR FULL ROTATION. IF MORE OR LESS CLEARANCE IS
DESIRED SLIDE THE RACK FORWARD OR BACKWARDS IN THE MOUNTING CHANNELS. ONCE THE
DESIRED POSITION IS FOUND, TORQUE ALL 1/4" NUTS TO 8 FT-LBS TO LOCK THE POSITION OF THE RACK
KNAACK L.L.C.
CONFIDENTIAL, PRINTED
COPIES ARE NOT TO BE
REMOVED FROM SITE
WITHOUT WRITTEN CONSENT.
THIRD ANGLE PROTECION
FORMAT
SW
PAGE NUMBER
SCALE:
DATE:
DRAWN BY:
PART NAME:
MATERIAL:
TOLERANCES=
(EXCEPT AS NOTED)
ANGULAR
±1°
LINEAR
±.031
=CONTROL DIMENSION
1:24
2291-3-01 INSTALL 3
PAGE OF
1916
PART NUMBER: REV.
REV.
PART NUMBER: