Assembly Instructions

Page 2
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
CAUTION
Be safe - always wear protective eye wear to keep debris out of your eyes when installing
WEATHER GUARD
®
Van Products
WARNING
Prior to drilling, check under vehicle for fuel, tanks, fuel lines, brake lines, electric wires,
etc. To avoid cutting or puncturing them. Do not use Blind Fasteners in these areas.
Tools Needed
• THREADLOCKER COMPOUND
• 1/2” SOCKET AND/OR WRENCH
• 3/16” HEX KEY/DRIVER
• 1/4” HEX KEY/DRIVER
• 2X 9/16 SOCKET AND/OR WRENCH
• 7/16” SOCKET AND/OR WRENCH
• SAW RECOMMENDED FOR RAM
PROMASTER 118” WHEELBASE
• DRILL WITH 21/64” DRILL BIT
RECOMMENDED FOR RAM
PROMASTER 118” WHEEBASE
• TORQUE SETTABLE DRIVER OR TORQUE
WRENCH.
• IMPACT WRENCH (OPTIONAL)
BEFORE YOU BEGIN
The best time to install the EZGLIDE2™ dual drop-down ladder rack when
rst installing the rack on the vehicle. After checking that your product is
complete, follow along with the single drop-down installation instructions,
adding the dual drop-down parts at the same time.
These instructions are written assuming that you are adding a dual-drop
down kit to an existing installation.