Assembly Instructions

USER INSTRUCTIONS
Page 7
E-CLIP
DRIVE TUBE CAM
STEP 2 - INSTALL LADDER HOOKS
Using 1-3/8x5/8” bolt, 1-3/8” nylon lock nut, and 2-3/8” washers install
the xed ladder hook to the drop down unit. The hook should be located
according to the diagram in the upper set of holes, but may be adjusted
depending on ladder dimensions and user preference. Torque nut to
30 ft-lbs.
Repeat for second drop down unit.
AC
E
Torque to 30 ft-lbs
F
G
THREE TEIR LADDER
TWO TEIR LADDER
TWO TEIR LADDER- 8"
THREE TEIR LADDER- 10"
STEP 2- INSTALL LADDER HOOKS
USING 2-5/16X3" SCREWS, 2-5/16" NUTS, AND 2-LADDER HOOK SUPPORTS,
INSTALL THE SLIDE LADDER HOOK ON THE SLIDE DOWN UNIT. THE HOOK SHOULD BE LOCATED ACCORDING TO THE DIAGRAM
BUT MAY BE ADJUSTED DEPENDING ON LADDER DIMENSIONS AND USER PREFERENCE. TORQUE NUTS TO 17 FT-LBS
USING 1-3/8X5/8" BOLT, 1-3/8" NYLON LOCK NUT, AND 2-3/8" WASHERS INSTALL THE FIXED LADDER HOOK TO THE DROP DOWN UNIT.
THE HOOK SHOULD BE LOCATED ACCORDING TO THE DIAGRAM, BUT MAY BE ADJUSTED DEPENDING ON LADDERY DIMENSIONS
AND USER PREFERENCE. TORQUE NUT TO 30 FT-LBS
Torque to 17 ft-lbs
KNAACK L.L.C.
CONFIDENTIAL, PRINTED
COPIES ARE NOT TO BE
REMOVED FROM SITE
WITHOUT WRITTEN CONSENT.
THIRD ANGLE PROTECION
FORMAT
SW
PAGE NUMBER
SCALE:
DATE:
DRAWN BY:
PART NAME:
MATERIAL:
TOLERANCES=
(EXCEPT AS NOTED)
ANGULAR
±1°
LINEAR
±.031
=CONTROL DIMENSION
1:24
2291-3-01 INSTALL 1
PAGE OF
195
PART NUMBER: REV.
REV.
PART NUMBER:
AC
E
Torque to 30 ft-lbs
F
G
THREE TEIR LADDER
TWO TEIR LADDER
TWO TEIR LADDER- 8"
THREE TEIR LADDER- 10"
STEP 2- INSTALL LADDER HOOKS
USING 2-5/16X3" SCREWS, 2-5/16" NUTS, AND 2-LADDER HOOK SUPPORTS,
INSTALL THE SLIDE LADDER HOOK ON THE SLIDE DOWN UNIT. THE HOOK SHOULD BE LOCATED ACCORDING TO THE DIAGRAM
BUT MAY BE ADJUSTED DEPENDING ON LADDER DIMENSIONS AND USER PREFERENCE. TORQUE NUTS TO 17 FT-LBS
USING 1-3/8X5/8" BOLT, 1-3/8" NYLON LOCK NUT, AND 2-3/8" WASHERS INSTALL THE FIXED LADDER HOOK TO THE DROP DOWN UNIT.
THE HOOK SHOULD BE LOCATED ACCORDING TO THE DIAGRAM, BUT MAY BE ADJUSTED DEPENDING ON LADDERY DIMENSIONS
AND USER PREFERENCE. TORQUE NUT TO 30 FT-LBS
Torque to 17 ft-lbs
KNAACK L.L.C.
CONFIDENTIAL, PRINTED
COPIES ARE NOT TO BE
REMOVED FROM SITE
WITHOUT WRITTEN CONSENT.
THIRD ANGLE PROTECION
FORMAT
SW
PAGE NUMBER
SCALE:
DATE:
DRAWN BY:
PART NAME:
MATERIAL:
TOLERANCES=
(EXCEPT AS NOTED)
ANGULAR
±1°
LINEAR
±.031
=CONTROL DIMENSION
1:24
2291-3-01 INSTALL 1
PAGE OF
195
PART NUMBER: REV.
REV.
PART NUMBER:
AC
E
Torque to 30 ft-lbs
F
G
THREE TEIR LADDER
TWO TEIR LADDER
TWO TEIR LADDER- 8"
THREE TEIR LADDER- 10"
STEP 2- INSTALL LADDER HOOKS
USING 2-5/16X3" SCREWS, 2-5/16" NUTS, AND 2-LADDER HOOK SUPPORTS,
INSTALL THE SLIDE LADDER HOOK ON THE SLIDE DOWN UNIT. THE HOOK SHOULD BE LOCATED ACCORDING TO THE DIAGRAM
BUT MAY BE ADJUSTED DEPENDING ON LADDER DIMENSIONS AND USER PREFERENCE. TORQUE NUTS TO 17 FT-LBS
USING 1-3/8X5/8" BOLT, 1-3/8" NYLON LOCK NUT, AND 2-3/8" WASHERS INSTALL THE FIXED LADDER HOOK TO THE DROP DOWN UNIT.
THE HOOK SHOULD BE LOCATED ACCORDING TO THE DIAGRAM, BUT MAY BE ADJUSTED DEPENDING ON LADDERY DIMENSIONS
AND USER PREFERENCE. TORQUE NUT TO 30 FT-LBS
Torque to 17 ft-lbs
KNAACK L.L.C.
CONFIDENTIAL, PRINTED
COPIES ARE NOT TO BE
REMOVED FROM SITE
WITHOUT WRITTEN CONSENT.
THIRD ANGLE PROTECION
FORMAT
SW
PAGE NUMBER
SCALE:
DATE:
DRAWN BY:
PART NAME:
MATERIAL:
TOLERANCES=
(EXCEPT AS NOTED)
ANGULAR
±1°
LINEAR
±.031
=CONTROL DIMENSION
1:24
2291-3-01 INSTALL 1
PAGE OF
195
PART NUMBER: REV.
REV.
PART NUMBER:
3/8 X 7/8 BOLT
3/8 WASHER
FIXED LADDER HOOK
3/8 LOCK NUT
3/8 WASHER