Assembly Instructions

1
INSTALLATION MANUAL
End Panel Mounted Accessory
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
FOR THE WAY YOU WORK
TM
*24-0296*
Part No. 24-0296 03/12
• Plan the placement of your accessories before installing them, some accessories may be easier to
install before mounting shelving into the van.
• Install panel mounted accessories before shelf mounted accessories.
• WEATHER GUARD
®
Rapid Mount™ End Panels have pre-punched mounting holes simplifying installation.
TOOLS REQUIRED
BOLT KIT
DESCRIPTION QTY.
Mounting Bolt, 1/4-20 x 1/2"
round head, Phillips
4
1/4-20 Nut 4
Washer, Flat 1/4" 4
• 7/16 Open or Box end wrench
• Phillips Screwdriver
INSTALLATION TIME
Approximate installation time: 5 minutes
per unit depending on van equipment
installation experience.
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)
STEP 1. Position accessory over mounting
holes, taking into account clearances to access
and use the accessory.
STEP 2. Use four 1/4-20 x 1/2" bolts and 1/4-
20 nuts to secure accessory to end panel with
the nut on the accessory side.
STEP 3. Tighten to 18 in-lbs.
INSTALLATION STEPS
Be safe - always wear protective eye-
wear to keep debris out of your eyes
when installing WEATHER GUARD
®
Van Products.
CAUTION
Representative of End Panel
Mounted Accessories

Summary of content (6 pages)