Manual

CYLINDER INSTALLATION
Cotter Pin
Clevis Pin
5/16-18 Nylon Lock Nut
(3) 3/8" Flat Washer
5/16-18 x 4-1/2" Hex Hd. Bolt
(A)
(C)
(B)
STEP 15 Attach front of Cylinder as shown. Bend over
Cotter Pin after inserting it through Clevis Pin.
NOTE: Turn the Flow Control
counter clockwise to release
pressure. Adjust Flow Control
Screw Per Instruction Decal
On Handle Tube after final
assembly and installation.
STEP 14 Insert Aluminum Bushing (A) into Rear Cross-Member (B). Attach back of Cylinder (C) to crossmember by installing 5/16-18 x 4-1/2"
Fastener. NOTE: After installing Bolt, apply
Loctite 290 to threads, then install the nut.
11