Manual

FRONT TO REAR DRIVE TUBE ASSEMBLY
STEP 16
Locate desired front to rear length
(5' or 6' or 7' or 8') and install
5/16-18 x 2" Fasteners
(Tighten fasteners to 200 in. lbs.)
(4) 5/16-18 Nylon Lock Nut
(8) 5/16" Flat
Washer
(4) 5/16-18 x 2"
Hex Hd. Bolt
STEP 17
Cover any exposed holes on Front and Rear Drive Tubes with
the 1" Dia. Vinyl Hole Covers STEP 18
Seal the ends of the Center Drive Tube, the four 5/16-18 Fasteners,
and the two 3/8-16 Fasteners with the tube of sealant supplied.
13