User guide

USE THESE HOLES FOR DESIRED LENGTH

ear Pivot Arm

Front Pivot Arm

STEP 13

Determine the length of rack you need.

FRONT TO REAR DRIVE TUBE ASSEMBLY

STEP 14

Locate desired front to rear length

(5' or 6' or 7' or 8') and install

5/16-18 x 2" Fasteners

(Tighten fasteners to 200 in. lbs.)

(4) 5/16-18

Nylon Lock

Nut

(8) 5/16" Flat

Washer

(4) 5/16-18 x 2"

Hex Hd. Bolt

STEP 15

Cover any exposed holes on Front and Rear Drive Tubes

with the 1" Dia. Vinyl Hole Covers

STEP 16

Seal the ends of the Center Drive Tube, the four 5/16-18 Fasten-

ers, and the two 3/8-16 Fasteners with the tube of sealant sup-

plied.