User guide

STEP 6

Slide a White Plastic Bushing (A)

into the Pivot Arm (B) as shown.

(A)

(B)

STEP 7

Use the supplied lubricant and coat the pre-assembled

Black Plastic Bushing (A). Insert the Front Drive Tube (B)

into the larger Black Plastic Bushing (C) in the Front Cross-

Member Assembly (D) and through the White Plastic Bush-

ing in the Pivot Arm (Step 4) so that the black bushings are

fully seated.

(A)

(B)

(C)

(D)

STEP 8

Align holes in the Pivot Arm, White Plastic Bushing, and

Front Drive Tube. Install the 3/8-16 x 2-1/4" Fastener.

* 3/8-16 x 2-1/4"

Hex Hd. Bolt

(2) 3/8" Flat

Washer

3/8-16 Nylon

Lock Nut

NOTE: Tighten all marked (*)

fasteners to 200 in. lbs.