Manual

USE THESE HOLES FOR DESIRED LENGTH

Front Pivot Arm

ear Pivot Arm

STEP 11

Determine the length of rack you need.

FRONT TO REAR DRIVE TUBE ASSEMBLY

STEP 12

Locate desired front to rear length (5' or 6' or 7' or 8') and install

5/16-18 x 2" Fasteners (Tighten fasteners to 200 in. lbs.)

(4) 5/16-18

Nylon Lock

Nut

(8) 5/16" Flat

Washer

(4) 5/16-18 x 2"

Hex Hd. Bolt

STEP 13

Cover any exposed holes on Front and Rear Drive Tubes

with the 1" Dia. Vinyl Hole Covers

STEP 14

Seal the ends of the Center Drive Tube, the four 5/16-18 Fasten-

ers, and the two 3/8-16 Fasteners with the tube of sealant sup-

plied.