Instruction Manual

INSTALLATION MANUAL

BULKHEAD HINGE KIT

ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS

BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.

WWW.WEATHERGUARD.COM

VAN STORAGE SOLUTIONS

FOR THE WAY YOU WORK

*24-0310*

Part No. 24-0310 REV. C ECN 5305 04/13

TOOLS REQUIRED

• Phillips Head Screwdriver

• 3/8" Ratchet Drive

• Sockets: 5/16", 11/32", 7/16"

• Open End Wrenchs: 11/32", 3/8"

INSTALLATION TIME

Approximate installation time: 15 minutes

per unit depending on van equipment

installation experience.

PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)

PARTS LIST

A 1 Door Handle Assembly

B 2 Hinges

C 1 9" Weatherstripping

D 1 Bolt Kit

• Installing your WEATHER GUARD

Bulkhead is very clear cut following these instructions.

• Before cutting or drilling in the

, verify the location of you gas tank, fuel lines and electrical

cables so you don’t accidentally cut something important.

• Make sure that the blind fasteners go directly into the sheet-metal

and not through a

mat. Cut clearance holes for fasteners and spacers. Always wear eye protection when drilling

or cutting.

PAGE 1
INSTALLATION MANUAL BULKHEAD HINGE KIT VAN STORAGE SOLUTIONS WWW.WEATHERGUARD.COM FOR THE WAY YOU WORK TM ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT. PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION) • Installing your WEATHER GUARD® Bulkhead is very clear cut following these instructions.
PAGE 2
INSTALLATION INSTRUCTIONS STEP 1: Attach Hinges to Driver Side Panel using six (6) #8-32 x 1/2" Machine Screws and #8-32 Nylon Lock Nuts from the bolt kit supplied. NOTE: Not all mounting holes will be used on the vertical sides of either of the panels. Extra mounting holes are for the non-swing door option for this Bulkhead. STEP 2: Attach Center Door Panel to Hinge/Driver Panel using eight (8) #8-32 x 1/2" Machine Screws and #8-32 Nylon Lock Nuts from the bolt kit supplied with the 86555 Hinge Kit.
PAGE 3
WARNING This product can reduce the driver’s ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which can cause an accident. Extra precautions should be taken when driving a vehicle with this pr oduct. Make all adjustments necessary to ensure maximum visibility, including but not limited to, changing mirror and seating positions. State and local laws may prohibit obstruction of windows in a moving vehicle.