Instructions / Assembly

10
4
VERIFY LATCH ALIGNMENT (CONTINUED)
LATCH OPERATION
c. Deploy Slider Bar with Latch until it reaches the middle of the track and latches onto
the hook. Verify the Latch and Latch Hook align properly. Latch Hook can be adjusted as
needed with a hand screwdriver.
TIP: The Latch Hook comes pre-installed and will face either up or down depending on
the chosen Screen Housing orientation (see page 5). If you prefer to operate the screen by
always pushing either down or up and, that is not the current operation, remove the two
screws that hold the Latch Hook, turn the Latch Hook in the opposite direction and then
reinstall the screws and adjust the Latch Hook as needed.
On the handle interior, there is a Handle
Lock. The lock is swiveled to lock or
unlock the handle. When the screen is
covering the opening and the handle is in
the locked position, the screen cannot be
unlatched and opened.
UNLOCK
LOCK
Latch
Hook