Instructions / Assembly

ASSEMBLE COMPONENTS (CONTINUED)

b. Remove all tape and packaging material. If your

opening falls within the standard range of 68”-72”

width, insert one end of each track into end of the

Latch Housing. With the notch towards the front,

pull out the Slider Bar just enough to move the

Track all the way to the corner. Ensure the Slider

Bar is in the Track.

If the opening is less than 68”, and the top and

bottom tracks have to be shortened (See page 5),

insert the original uncut ends of each Track into

end of the Latch Housing.

c. Slide a Sill Plate Extender onto each end

of the aluminum Sill Plate Assembly. Slide Sill

Plate Assembly onto bottom Track.

NOTE: Do not deploy screen until it is

assembled to doorway.

WOOLPILE

INSERT TRACK

STRAIGHT INTO

PLASTIC CORNER

TRACK INSTALLED

INTO SCREEN

HOUSING

BOTTOM

TRACK WITH

SILL PLATE AND

EXTENDERS

NOTCH AT

SCREEN

FRONT

INTERIOR