Instructions / Assembly

7
1
2
ASSEMBLE COMPONENTS (CONTINUED)
INSTALL SCREEN
d. Insert the other end of the tracks
into the Latch Hook Housing.
a. Push Housings together so the width of the screen frame is at its narrowest. (See page
2 for mounting instructions). Place screen assembly onto door sill.
For flush and short sills, the bottom screen track should be fully supported by filler board
or ground. For long sills, the assembly rests on top of the sill (see examples on page 4).
If needed, adjust the Slide Bolt
height using the inner-most screw
shown. Final adjustment will be
performed later.
TOP VIEW