Installation Guide

We’re happy to help. Call 1-855-224-9761.
1. If needed, alter the post height and install
the post caps.
This step will be repeated on the top rail.
4
Classic Railing Installation Guide
Section 3
Section 4
Mounting Bracket
Pilot Hole
1. Assemble the railing sections and slide
the mounting brackets over the vinyl rail
ends. For the top rail, assure that the
pilot holes on the bracket are positioned
towards the top of the rail. Likewise, for
the bottom rail, assure that the pilot holes
on the bracket are positioned towards
the bottom of the rail.
2. Position the entire section between the
posts, aligning the bottom bracket with
the line previously drawn.
3. Center the mounting bracket on the post
and install the bottom of the mounting
bracket on the drawn line.
4. Fasten the mounting bracket to the post
using the provided 1-1/2 in. screws,
one on each side. Screws should be
kept straight and not angled.
5. Fasten the vinyl rail to the mounting
brackets using the provided 1 in. screws,
two on each side of the rail. This will
secure the bottom rail.
6. Place hole plugs over installed screws.