Classic Vinyl Stair Railing Installation Guide
Classic Stair Railing Installation Guide THE BEST CHOICE FOR STRONG & DURABLE RAILING SYSTEMS Our exclusive manufacturing process ensures our vinyl railing will provide superior strength plus it is virtually maintenance free. This guide will help make your installation easy. For questions, please call 1-855-224-9761 and welcome to Weatherables. Please note: It is the responsibility of the installer to conform to local building codes and safety requirements.
Classic Stair Railing Installation Guide Installation Tips: 1. The bracket kits include two different size screws. The 1-1/2” screws are used to install the mounting bracket to the post. The 1” screws are used to attach the rail to the mounting bracket. 2. If you are using an optional post mount, use the 1” screws that come with the post mounting hardware to install the mounting brackets. 3. While marking the angle on the bottom rail, ensure the pickets are equally spaced from each post. 4.
Classic Stair Railing Installation Guide Section 1 These instructions are designed to be supplemental; review the instructions provided with the brackets before starting installation. 1. Plumb posts and install optional post skirt before installing rail mounting brackets. 2. Determine the distance between the deck and the bottom rail based on local code (generally 2”). 3. Stair installation requires the rail ends to be cut at the same angle as the stairs. 4.
Classic Stair Railing Installation Guide Section 2 1. Slide the brackets over the bottom rail with the flush edges towards the post 2. Line the bottom rail along the stairs, assuring that the foot block is inserted into the hole on the bottom of the rail. 3. Fasten the brackets to the post using the provided 1.5” screws, then secure the rail to the brackets with the provided 1” screws. 4. Gently snap the hole plugs over the 1.5” screws and snap the screw caps onto the 1” screws. We’re happy to help.
Classic Stair Railing Installation Guide Section 3 1. Insert the spindles into the bottom rail; then starting at one end, install the top rail by lining the spindles up with the routed holes in the rail. Ensure that the brackets are placed onto the ends of the rails before installing the top rail. 2. Fasten the brackets to the post with the provided 1.5” screws. Then secure the rail to the bracket with the 1” screws. 3. Gently snap the hole plugs over the 1.