g
Classic Railing Installation Guide THE BEST CHOICE FOR STROnG & DURaBlE RaIlInG SYSTEMS Our exclusive manufacturing process ensures our vinyl railing will provide superior strength plus it is virtually maintenance free. This guide will help make your installation easy. For questions, please call 1-855-224-9761 and welcome to Weatherables. Please note It is the responsibility of the installer to conform to local building codes and safety requirements.
Classic Railing Installation Guide Installation Tips: 1. A non-ferrous metal blade can be used to cut the vinyl and aluminum at the same time. Cut slowly and use all safety precautions 2. Before installing the rails, ensure the aluminum is seated into the vinyl rail properly. The large opening of the H-Channel should be towards the pickets. Top Rail 3. If using vinyl sleeves, it is easier to mark the mounting bracket position prior to installing them over wood posts or post mounts. 4.
Classic Railing Installation Guide Section 1 These instructions are designed to be supplemental; review the instructions provided with the brackets before starting installation. 1. Plumb posts and install optional post skirt before installing railing sections. 2. Determine the distance between the deck and the bottom rail based on local code (generally 2 in.). 3. Mark your post where the mounting bracket will be installed. 4. When marking your posts, subtract 3/4 in.
Classic Railing Installation Guide Section 3 1. Assemble the railing sections and slide the mounting brackets over the vinyl rail ends. For the top rail, assure that the pilot holes on the bracket are positioned towards the top of the rail. Likewise, for the bottom rail, assure that the pilot holes on the bracket are positioned towards the bottom of the rail. Pilot Hole 2. Position the entire section between the posts, aligning the bottom bracket with the line previously drawn. 3.
WEATHERABLES.COM WEA01-2017 Purchaser has the sole responsibility to determine whether Weatherables® products comply with applicable codes and are appropriate for the intended use. The purchaser and installer should review the intended use of the products with a licensed professional engineer to determine code compliance and the intended use. Weatherables® is a federally registered trademark of USA Vinyl, LLC. ©2017 USA Vinyl, LLC.
