Installation Guide

We’re happy to help. Call 1-855-224-9761.
11
Routed top rail
Pickets insert
into routed rail
Post A
Semi-Privacy and Pool with a Mid-Rail
1. Follow the layout and post installation instructions
on page 3.
2. Install the 1st post (post A) with concrete around
the post. Be sure to level and plumb.
3. Have another post (post B) sitting in the adjacent
hole.
4. Slide the bottom rail (with the aluminum insert) and
mid-rail into post A. The mid-rail will have routed
holes on the top and bottom of the rail. The larger
routed holes should face towards the ground.
5. Insert the pickets down through the mid-rail and
into the routed holes in the bottom rail.
6. Slide the bottom rail into the second post (post B).
7. Next, slide the top rail into post A with the opposite
end (at post B) angled upward towards the sky.
Holding the top rail at an upward angle, slowly line
the pickets up with the routed holes in the top rail
while lowering the rail into place.
8. Once the panel is fully assembled, slide the mid-rail and then the top rail into the second post
(post B).
9. Pour concrete around post B to about 3 inches below ground level and level and plumb.
Pool without a Mid-Rail
1. Follow the layout and post installation instructions on
page 3.
2. Install the 1st post (post A) with concrete around the post.
Be sure to level and plumb.
3. Have another post (post B) sitting in the adjacent hole.
4. Slide the bottom rail (with the aluminum insert) into post
A.
5. Insert the pickets into the routed holes in the bottom rail.
6. Slide the top rail into post A with the opposite end (at post
B) angled upward towards the sky. Holding the top rail at
an upward angle, slowly line the pickets up with the
routed holes in the top rail while lowering the rail into
place.
7. Once the panel is fully assembled, slide the bottom rail
and then the top rail into the second post (post B).
8. Pour concrete around post B to about 3 inches below
ground level and level and plumb.
Pickets slide into
routed rail
Routed rail
Post A
Panel Installation
Routed bottom rail
Cap
Routed hole
for post
Routed hole
for post