Installation Guide

We’re happy to help. Call 1-888-743-3673.
4
Gate Installation
DOUBLE GATE INSTALLATION
1. Follow the same instructions as per a single gate when installing the hinges for both gates.
2. To calculate the variances for the latch you must treat the xed gate as if it were a standard fence
panel.
3. The ideal hardware installation on a double gate should have equal spacing between posts and gates.
4. Install the Drop Rod to post of the xed gate.
Gate Rail Gate Rail
Socket post Socket post
Socket post Socket post
SWING GATE FIXED GATE
Gate Rail Gate Rail
Equal spacing if possible
Fence Rail
0.75" gap 0.75" gap
0.75" gap
1. Determine the direction the gate is to swing, usually swings away from yard. Check your local codes!
2. Install aluminum insert on the hinge side prior to the installation of the gate.
3. Locate and follow hardware installation instructions.
SINGLE GATE INSTALLATION
The gate will be mounted to be ush with the side of the fence that the gate will be swinging. See the
illustration below. Be sure the gate will be high enough to clear obstructions such as snow. The gate
posts should be cut on site as needed. Some installers cut the gate socket posts off at the bottom of
the bottom gate pocket. DO NOT cut into the gate pocket.
0.75" gap
0.75" gap
YARD
GATE - SWINGS INTO THE YARD (NOT RECOMMENDED PER UNIVERSAL POOL CODE)
GATE - SWINGS AWAY FROM YARD
0.75" gap 0.75" gap
Hinge placement (requires
post with aluminum insert)