Instructions / Assembly

Halifax 5' x 8'
Note: If re-ordering additional product, please compare your existing specs with our current specs for any changes or updates.
Use a small teardrop of glue in the inside corners of cap.
Maximum rack of 2.5" per 8' O.C.
2"
1.7"
3.5"
INTERLOCKING T&G PICKETS
U-Channels
28.5"
1.5 x 5.5 x 95.75
*Actual measurements may vary
*Panel should be installed 2" off ground
Updated 01/31/2011
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
2
Spindle
7/8" x 1-1/2 "x 20-1/4"
2
Spindle
7/8" x 1-1/2 "x 16-7/8"
7/8" x 1-1/2" x 17-1/2"
2
Spindle
7/8 "x 1-1/2 "x 18-7/8"
2
Spindle
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
1-3/4 "x 3-1/2" x 8' Rail
1-1/2" x 5-1/2" x 8' Rail
1-1/2" x 5-1/2" x 8' Rail
61" U Channel
7/8 "x 6 "x 64" T&G
1-1/4" x 1-3/4" x 8'
96" *
5.5"
59.5"
5.5"
1.5 x 5.5 x 95.75
6"
12.5"
1
Qty
Item
Dimension
Material List
WRHS USE ONLY
1
Top Rail
1-3/4" x 3-1/2 "x 95-3/4"*
1
Mid Rail
1-1/2" x 5-1/2" x 95-3/4"*
1
Bottom Rail
1-1/2" x 5-1/2" x 95-3/4"*
2
Spindle
7/8" x 1-1/2" x 19-1/2"
2
U Channels
1-1/8" x 1-1/4" x 28-1/2"
15
1
Aluminum
1-1/4" x 1-3/4" x 95-3/4"
Pickets
7/8" x 6" x 32"*
7/8" x 1-1/2" x 18-1/8"
2
Spindle
2
Spindle
7/8" x 1-1/2" x 16-1/4"
2
Spindle
7/8" x 1-1/2" x 15-3/4"
2
Spindle
7/8" x 1-1/2" x 15-1/4"
28
2
Spindle
7/8" x 1-1/2" x 14-3/4"
Picket Caps
7/8" x 1-1/2 "
2
Spindle
7/8" x 1-1/2" x 14-3/8"
7/8" x 1-1/2" x 14"
PWPR-OTS-5X8UG
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8" x 1-1/2" x 59" Picket
7/8 "x 1-1/2" Spade Cap
7/8" x 1-1/2" x 59" Picket
2
Spindle
7/8" x 1-1/2" x 13-7/8"
7/8 "x 1-1/2" x 13-3/4"
2
Spindle
2
Spindle
Aluminum
U-Channel
1.75 x 3.5 x 95.75