Installation Guide

Before You Begin Installation
Consult your local authorities for any permits required to construct the arbor.
Check with local building code officials to review any required permits or building
limitations.
Read instructions thoroughly prior to assembly.
If you have questions or concerns with this product please DO NOT return before
consulting a product specialist. Please refer all questions and concerns to our
product specialist at 1-888-743-3673.product specialist at 1-888-743-3673.
For easier installation, it is recommended to have at least two people to handle, fit
and secure arbor components.
Do not stand, sit, store, or hang items on the pergola.
Repair or replace broken parts immediately. Call 1-888-743-3673 for replacement
parts.
At regular intervals inspect your arbor to make sure that assembly integrity has At regular intervals inspect your arbor to make sure that assembly integrity has
been maintained.
Tools Required for Installation:
1. Extension Cord 9. Ratchet with Deep Socket - 1/2” *
2. Hammer Drill * 10. Level
3. Reciprocating Saw 11. Tape measure ( min 25’)
(optional only if you are cutting 12. 1 Ladder (at least the height of
down material) your arbor)
4. Power Drill4. Power Drill 13. Rubber Mallet
5. 1” Drill Bit for metal 14. Pencil
6. Drill Bits - 3/16” 15. Capenter’s Square
7. Phillips Screwdriver Bit
8. Masonry Bit - 3/8” *
* These will only be needed with the optional concrete mount installation.