Manual

-17-
Fig. 12
DISASSEMBLY OF BOLT FROM RECEIVER
1. Remove barrel (refer to Removing barrel from Receiver Assembly, page 15)
2. Remove forearm by sliding the forearm assembly forward until the bolt assembly clears the receiver.
3. The bolt is exposed and available to lift off the slide assembly
REMOVAL OF CHOKE TUBES
Remove Multi-Choke

choke tubes as describe under Removing Choke Tubes, Page 8.
Further disassembly of the shotgun is not recommended. If further disassembly is required, contact a
Weatherby Authorized Service Center or your local gunsmith.