Product Manual

WeatherHawk®

Toll free in USA: 866-670-5982, International: 435-227-9802, FAX: 435-227-9749 Printed 2013

SP2-KT 5 W Solar Panel Kit

This solar panel is for use with any WeatherHawk Signature Series weather

station. It recharges the internal battery and has a 72 inch

surface area and

produces 5 watts at a peak of 17.1 volts.

The SP2-KT includes

 5 W solar panel

 Mounting hardware

ACP2 AC Converter

The ACP2 recharges the WeatherHawk battery by converting 110-220 VAC, 50/60 Hz power to 18 VDC. The

ACP2 must be installed in a non-condensing environment or a weatherproof enclosure.

The ACP2 includes

 UL-approved, AC/DC converter with US Standard plug prongs

 20 feet (6.2 m), UV resistant waterproof cable with an environmental

connector for connecting to the WeatherHawk.

Mounting/Installation Kits

TP1-Tripod/Mast Assembly

The TP1 tripod/mast assembly provides a stable support for the WeatherHawk and is

suitable for both ground and rooftop installations.

The TP1 includes

 Tripod

 Mast that places the WeatherHawk wind sensors at a height of 38” to 60”

(99 to 156 cm)

 Kit that includes (3) tripod feet with hardware, (6) lag bolts (used for

rooftop installation only), and 3 sealing pads (used for rooftop installations

only)