Instructions / Assembly

43
42
888-745-0004 · weatherstrong.com · 888-745-0004 · weatherstrong.com ·
WIDE BRUSHED C-PULL
FEATURES
• 316 Stainless steel handle with screws
• 4 1/16" overall length
• 3 ¾" center to center
DECORATIVE HARDWARE
DH-00171
DH-45170
DH-21021
DH-92170
CONTOURED POLISHED C-PULL
FEATURES
• 316 Stainless steel handle with screws
• 4 ¼" overall length
• 3 15/16" center to center
EURO BAR PULL
FEATURES
• 316 Stainless steel handle with screws
• 7 9/32" overall length
• 5 1/32" center to center
PROFESSIONAL BAR PULL
FEATURES
• 316 Stainless steel handle with screws
• 8 ¾" overall length
• 7 ½" center to center
Please make sure to check the width of
your drawer front. The handle ts drawer
fronts of 18" wide or more.
**Fits all Miami drawer fronts**
3 4
Leveling Leg Assembly
For easier handling and to avoid damage remove doors and drawers from the cabinet.
Then, using two or more people, place the cabinet upside down on a protected surface.
Place the 2 front leg brackets 3-1/2"
from the front edge with the support
plate overlapping the end panel – 1/4"
from the outer edge.
1
Place the 2 back leg brackets 1" from
the back edge with the support plate
overlapping the end panel – 1/4" from
the outer edge.
2
Use a phillips bit to attach the legs
with the stainless steel screws supplied.
DO NOT OVERTIGHTEN!
Adjust the leveling legs up or down to
bring the cabinet to a level plumb position.
WEATHERSTRONG.COM
Leveling Leg Installation
Simple assembly is required
for each leveling leg.
3
1
/2 in
1
/4 in
from edge
1
/4 in
1in
3 4
Leveling Leg Assembly
For easier handling and to avoid damage remove doors and drawers from the cabinet.
Then, using two or more people, place the cabinet upside down on a protected surface.
Place the 2 front leg brackets 3-1/2"
from the front edge with the support
plate overlapping the end panel – 1/4"
from the outer edge.
1
Place the 2 back leg brackets 1" from
the back edge with the support plate
overlapping the end panel – 1/4" from
the outer edge.
2
Use a phillips bit to attach the legs
with the stainless steel screws supplied.
DO NOT OVERTIGHTEN!
Adjust the leveling legs up or down to
bring the cabinet to a level plumb position.
WEATHERSTRONG.COM
Leveling Leg Installation
Simple assembly is required
for each leveling leg.
3
1
/2 in
1
/4 in
from edge
1
/4 in
1in
3 4
Leveling Leg Assembly
For easier handling and to avoid damage remove doors and drawers from the cabinet.
Then, using two or more people, place the cabinet upside down on a protected surface.
Place the 2 front leg brackets 3-1/2"
from the front edge with the support
plate overlapping the end panel – 1/4"
from the outer edge.
1
Place the 2 back leg brackets 1" from
the back edge with the support plate
overlapping the end panel – 1/4" from
the outer edge.
2
Use a phillips bit to attach the legs
with the stainless steel screws supplied.
DO NOT OVERTIGHTEN!
Adjust the leveling legs up or down to
bring the cabinet to a level plumb position.
WEATHERSTRONG.COM
Leveling Leg Installation
Simple assembly is required
for each leveling leg.
3
1
/2 in
1
/4 in
from edge
1
/4 in
1in
3 4
Leveling Leg Assembly
For easier handling and to avoid damage remove doors and drawers from the cabinet.
Then, using two or more people, place the cabinet upside down on a protected surface.
Place the 2 front leg brackets 3-1/2"
from the front edge with the support
plate overlapping the end panel – 1/4"
from the outer edge.
1
Place the 2 back leg brackets 1" from
the back edge with the support plate
overlapping the end panel – 1/4" from
the outer edge.
2
Use a phillips bit to attach the legs
with the stainless steel screws supplied.
DO NOT OVERTIGHTEN!
Adjust the leveling legs up or down to
bring the cabinet to a level plumb position.
WEATHERSTRONG.COM
Leveling Leg Installation
Simple assembly is required
for each leveling leg.
3
1
/2 in
1
/4 in
from edge
1
/4 in
1in
3 4
Leveling Leg Assembly
For easier handling and to avoid damage remove doors and drawers from the cabinet.
Then, using two or more people, place the cabinet upside down on a protected surface.
Place the 2 front leg brackets 3-1/2"
from the front edge with the support
plate overlapping the end panel – 1/4"
from the outer edge.
1
Place the 2 back leg brackets 1" from
the back edge with the support plate
overlapping the end panel – 1/4" from
the outer edge.
2
Use a phillips bit to attach the legs
with the stainless steel screws supplied.
DO NOT OVERTIGHTEN!
Adjust the leveling legs up or down to
bring the cabinet to a level plumb position.
WEATHERSTRONG.COM
Leveling Leg Installation
Simple assembly is required
for each leveling leg.
3
1
/2 in
1
/4 in
from edge
1
/4 in
1in
LEVELING LEG INSTALLATION - PLASTIC LEGS
LEVELING LEG ASSEMBLY
Simple assembly is required for each Leveling Leg
For easier handling and to avoid damage remove doors
and drawers from the cabinet. Then, using two or more
people, place the cabinet upside down on a protected
surface.
1. Place the 2 front leg brackets 3‑1/2" from the front
edge with the support plate overlapping the end
panel – 1/4" from the outer edge.
2. Place the 2 back leg brackets 1” from the back edge
with the support plate overlapping the end panel –
1/4" from the outer edge.
3. Use a Phillips bit to attach the legs with the stainless
steel screws supplied. DO NOT OVERTIGHTEN!
4. Adjust the leveling legs up or down to bring the
cabinet to a level plumb position.