Instructions / Assembly

9
8
888-745-0004 · weatherstrong.com · 888-745-0004 · weatherstrong.com ·
IMPORTANT - GRILL AND SIDE BURNER BASES
INSULATING JACKET REQUIRED
Customer Responsibility: Grill and side burner bases
must be installed with a jacket to maintain warranty
coverage
34½"
27"
36", 42"
*
11
7
/8"
Please Note:
These are the slots that will be precut into the toe kick material
GRILL THREE DOOR BASE
Item Number Width Depth Height
GB48IB 48 27 34.5
GB4830IB 48 30 34.5
GRILL DOUBLE DOOR BASE
Item Number Width Depth Height
GB36IB 36 27 34.5
GB3630IB 36 30 34.5
GB42IB 42 27 34.5
GB4230IB 42 30 34.5
FEATURES
• The face plate is modified in field to accept the
respective heat liner used with the gas grill
• Includes 4 ‘Sure Level’ polymer legs, shipped loose
for field installation and leveling
• Separate toe kick with 3 pre-cut ventilation outlets
• Stainless steel handles are required and sold
separately. See page 42 for details.
• Side Burner and Grill Base cabinets include pre-cut
ventilation outlets.
• 3 in the floor of the cabinet
• 1 3/4" x 1 3/4" square hole in each side
of the cabinet.
• These ventilation outlets allow the release of
possible heat or gas build up.
PLEASE NOTE
All built in grill heads require an insulated jacket.
Please consult your grill manufacturer for the
appropriate model.
4 ventilation outlets included to allow the release of
possible heat or gas build-up.
1 in the toe kick panel
3 in the oor of the cabinet
Venting will still need to be cut on the job site at the
end of a cabinet run. Venting will need to be cut into
the decorative end panel. Please see pg 49-50 for
more information.
Consult your grill manufacturer for the appropriate
model.
34½"
Depth
36", 42"
*
11
7
/8"
48"
34½"
*
11
7
/8"
GRILL CABINETS
Grill Cabinet Coding
GB 36 IB
GB
Cabinet Code
36
Width
IB
* Grill cabinets are manufactured with two full upper face plates that will need to be eld modied
to accept the heat liner used with the gas grill. The second matching panel will be shipped loose
for ease of modication and installation. It can be attached with stainless steel screws or a suitable
construction grade adhesive. Under no circumstance should a grill be installed without the
appropriate heat liner specied by the manufacturer of the appliance or warranty is invalid.
Depth