Instructions / Assembly
weatherstrong.com 888-745-0004
10
Important Information:
Side Panel Venting
Venting will still need to be cut at the job site on the end of a cabinet run if that run contains a heat
component in that section. This will need to be cut/drilled into the decorative end panel. We have provided
recommended drill options below.
Side Burner base cabinets with a width of 15" to 24" include 6 ventilation outlets to allow the release of
possible heat or gas buildup.
• 1 in the toe kick panel
• 3 in the base shelf
• 2 in the side of the cabinet
Side Burner base cabinets with a width of 30" include 6 ventilation outlets to allow the release of possible
heat or gas buildup.
• 1 in the toe kick panel
• 3 in the base shelf
• 2 in the side of the cabinet
Please Note:InsulatedjacketmustbeusedwithallSideBurnerandGrillCabinets.
Grill Bases and Side Burner Cabinets
Please Note: These are the slots that will be precut into the toe kick material.
Panel as shipped Panel after cutting on
job site
Recommended drill
pattern