Instructions / Assembly

weatherstrong.com 888-745-0004

Priortoinstallationyouwillnditeasiertohandlethecabinetwiththedoorsanddrawersremoved.

Hinges can be removed from the hinge plate by

simply pressing in the release button on the end

of the hinge, and pulling away from the cabinet.

They are re-attached by hooking the hinge to the

plate and snapping the pressure release into place.

Pull the drawer out until it stops. Each drawer runner

has a small plastic release tab. One tab will point up

and the other will point down. Holding the drawer

box on each side, push the tabs in the opposite

direction from which they’re pointing and carefully

pull the drawer box out. Carefully push the runners

back into the cabinet.

Anchoring to Concrete Block Walls