Instructions / Assembly

weatherstrong.com 888-745-0004
4
1. Each Wall Cabinet requires 4 wall anchors (2 top, 2 bottom).
2. Screws should be placed in each corner approximately 2" from the end panels.
3. Pre-drill the pilot holes before you place the cabinet against the wall with a standard 3/16" drill bit.
4.Thenputthecabinetinplace.Ineachcornerusethe3/16"Tapcon®bitthroughthepilotholestocreate
starter holes into the concrete block, for the Tapcon® anchors.
5. Remove the cabinet to complete drilling the pilot holes into the concrete block. When complete, place the
cabinet against the wall.
6.Onceyouconrmthecabinetislevelandsquare,useTapcon®410StainlessSteel3/16"x2-3/4"
fasteners, with a ¼ stainless steel washer to secure the cabinet to the wall.
Anchoring to Concrete Block Walls
2”
inch
3
16
drill bit.
inch
3
16
3
2
4
x
inch Washer
1
4