Instructions / Assembly

weatherstrong.com 888-745-0004
5
1 inch
1
4
inch Pilot Hole
1
8
1
2
AsyouinstallyourBaseandWallcabinets,youshouldfastenthecabinetstogetheralongthefrontedge.
This will help reduce gaps between cabinets and maintain alignment.
1. To secure cabinets together, a 1-¼" stainless steel screw is used. (Model #WSSS1.25-Screw Kit) Pre-drill a
1/8" pilot hole in one end panel. Try to locate the joining screws where they will not be visible, above the
drawer runner or behind the hinge plate.
2.Useclampstoholdcabinetpanelinalignment.Insertthescrewthroughthepilotholeintothesecond
cabinet end panel – be careful not to countersink the head.
Fastening Cabinets Together