Instructions / Assembly

weatherstrong.com 888-745-0004
9
Grill Bases and Side Burner Cabinets
35½"
12⅞"
28"
Width
*
6 ventilation outlets included to allow the release of possible
heat or gas build-up.
• 1 in the toe kick panel
• 3 in the base shelf
• 2 in the side of the cabinet
Proper Venting:
Proper venting of Grill Bases or Side Burner cabinets is essential.
•EachSideBurnerandGrillBasecabinetarealreadyequippedwithprecutslotsintheoorandholesin
the sidewalls of the cabinet to vent.
• Vent slots have also been precut in a piece of toe kick to further help with the proper ventilation needed.
Grill Base and Side Burner cabinets will come with precut vent holes in the sidewalls and precut slots in
the cabinet. There will also be precut slots in the toe kick material. This will enable any excess gas to vent
from inside the cabinets. If using toe kick with your cabinets to cover the leveling legs, a piece of toe kick
with vent slots has been included with your Grill Base or Side Burner cabinet.
Please Note: Venting will still need to be cut on the job site at
the end of a cabinet run containing a heat component. This will
need to be cut into the decorative end panel.