Instructions / Assembly

39
888-745-0004 · weatherstrong.com ·
DESIGN TIPS – KAMADO STYLE GRILLS
Design Tips and Tricks: WeatherStrong Cabinetry – Kamado style grills
Kamado style grills come in various brands and sizes. With that in mind, here are a couple options to accommodate these grills.
Please keep in mind that they are achieved through eld modication and construction. Using a wall bridge cabinet (15” or 18” tall),
some matching base ends and a pack of legs, you can achieve a solution for these types of grills.
Each of the above methods will require a support brace to be built, behind the wall cabinet, to support the rear of the countertop
and the grill. This can be done using treated lumber secured to the wall, or to the oor. Be sure to reference the grill Manufacturer’s
recommendations for heat clearances around the grill.
If desired, the countertop can be installed around the grill (see below). However the homeowner or installer will need to review this
with their countertop fabricator before the template
If there will be a wall, directly behind the Kamado grill, make sure to refer to the manufacturer’s recommendations for clearances, to
ensure that the lid can be opened.
W361518OB pulled forward to meet
27” deep cabinets on each side.
Depending on the height of your grill,
you may need to use a 15” high.
W361518OB pulled forward to meet 24”
deep cabinets on the right side. The panels
on each side are cut to t the height of the
cabinets to create an open look.