Instructions / Assembly

7
888-745-0004 · weatherstrong.com ·
Bar Risers are 4” deep by 36” high and are available in
3” width increments from 12” to 48”. When securely
attached to the back of a 34 ½” high Open Back base
cabinet, the top of the riser will be approximately
40 ½” from the oor. These eld installed kits feature
a full-height ¾” thick enclosed All-Weatherboard®
composite material back panel and can only be paired
with the open back base cabinets. These kits will turn
almost any base cabinet into a two-level bar.
BAR RISER KIT
CONSTRUCTION OPTIONS
BACK VIEW
BASE CABINETS
34½"
36"
Base cabinet construction features a 30” high cabinet
box which must be mounted on-site on 4 ½” high ‘Sure
Level’ adjustable polymer legs. Legs are adjustable
from 4” to 5 ½” high. Optional stainless steel adjustable
legs are available as an accessory. Optional snap on
matching toe kick panels are available 6” high x 96”
long, for site modication and installation.
Open Back Wall Cabinets feature an open back design
with two ¾” thick and 3" high All-Weatherboard®
composite material installation rails (top and bottom)
for secure wall mounting. Open Back Base Cabinets
feature an open back design with three ¾” thick
and 3" high All-Weatherboard® composite material
installation rails (top, middle and bottom) for secure
wall mounting. Open Back cabinets are more
affordable and must be used in conjunction with Bar
Riser Kits to create freestanding raised bar counters.
PLEASE NOTE: Freestanding
Islands and peninsulas must
be secured to the oor
OPEN BACK CABINETS
WALL CABINETS
WALL CABINETS
BASE CABINETS
BASE CABINETS
BACK VIEW
BACK VIEW
Full Back wall cabinets and Island Back base
cabinets feature a full-height ¾” thick enclosed All-
Weatherboard® composite material back panel. Island
Back base cabinets can be installed as a freestanding
island, or as a peninsula extending from a wall.
FULL BACK / ISLAND BACK
BACK VIEW
BACK VIEW
PLEASE NOTE: Exposed cabinet
sides and backs MUST be covered
by a matching end/island panel