Installation Guide

weatherstrong.com 888-745-0004
Install:
1. Once your cabinets have been permanently set in place determine which direction you are placing your
vents.
2. You will need to mark and cut holes in each of the cabinets adjacent to your grill/side burner cabinet in the
directionthenaloutermostventwillbeplaced.
3. The outermost vent will be placed into the panel or cabinet side of this cabinet.
Ifyouwouldliketollallholescutintothecabinetsforventingextraventscanbepurchased.
Vent should be secured with suitable construction adhesive (not provided)
Important Information:
Side Burner base cabinets with a width of 15” to 24” include 4 ventilation outlets to allow the release of
possible heat or gas buildup.
• 1 in the toe kick panel
• 1 in the base shelf
• 1 loose, to be used on the exterior of the base cabinet at the end of a cabinet run. Placement will be high
or low depending on the type of gas (LP vs. NG)
Side Burner base cabinets with a width of 30” include 6 ventilation outlets to allow the release of possible
heat or gas buildup.
• 2 in the toe kick panel
• 2 in the base shelf
• 2 loose, to be used on the exterior of the base cabinet atthe end of a cabinet run. Placement will be high
or low depending on type of gas (LP vs. NG)
Please Note: Heat Liner must be used with all Side Burner and Grill Cabinets
Grill Bases and Side Burner Cabinets