Installation Guide

weatherstrong.com 888-745-0004
Priortoinstallationyouwillnditeasiertohandlethecabinetwiththedoorsanddrawersremoved.
Hinges can be removed from the hinge plate by
simply pressing in the release button on the end
of the hinge, and pulling away from the cabinet.
They are re-attached by hooking the hinge to
the plate and snapping the pressure release into
place.
Pull the drawer out until it stops. Each drawer runner
has a small plastic release tab. One tab will point up
and the other will point down. Holding the drawer
box on each side, push the tabs in the opposite
direction from which they’re pointing and carefully
pull the drawer box out. Carefully push the runners
back into the cabinet.
Anchoring to Concrete Block Walls