Instructions / Assembly

7
888-745-0004 · weatherstrong.com ·
Bar Risers are 4” deep by 36” high and are available in
3” width increments from 12” to 48”. When securely
attached to the back of a 34 ½” high base cabinet, the
top of the riser will be approximately 40 ½” from the
oor. These eld installed kits feature a full-height 3/4"
enclosed matching back panel and can only be paired
with the open back base cabinets. These kits will turn
almost any base cabinet into a two-level bar.
BAR RISER KIT
CONSTRUCTION OPTIONS
BACK VIEW
BASE CABINETS
34½"
Base construction features a 30” high cabinet box which
must be mounted on-site on 4 ½” high ‘Sure Level’
adjustable polymer legs. Legs are adjustable from 4”
to 5 ½” high. Optional stainless steel adjustable legs
are available as an accessory. Optional snap on toe kick
panels are available in 96” lengths for site modication
and installation.
DESIGNER WOODGRAIN DOOR FINISHES - Lifetime Limited Warranty
Open back cabinets feature an open design with
two installation rails (top and bottom) for wall mount
installations.
PLEASE NOTE: ISLAND
BACK CABINETS MUST BE
SECURED TO THE FLOOR
OPEN BACK
WALL CABINETS
WALL CABINETS
BASE CABINETS
BASE CABINETS
BACK VIEW
BACK VIEW
Full Back and Island Cabinets feature a full-height 3/4"
enclosed matching back panel, so Base Cabinets can
be installed as a free standing island or as a peninsula
extending from a wall.
FULL BACK / ISLAND BACK
BACK VIEW
BACK VIEW