Instructions / Assembly
38
888-745-0004 · weatherstrong.com ·
ISLAND BACK GRILL CABINETS
Grill Double Door Base
Grill Three Door Base
48"
34½"
11⅞"
27"
GB36IB 36 27 34.5 Full
GB42IB 42 27 34.5 Full
GB48IB 48 27 34.5 Full
Item Number Width Depth Height Back
Item Number Width Depth Height Back
34½"
11⅞"
27"
Width
• The face plate is modied in eld to accept the respective heat liner used
with the gas grill
• 3/4" All-Weatherboard™ cabinet construction
• Fully integrated back panel for installation
• Includes 4 ‘Sure Level’ polymer legs, shipped loose for eld installation
and leveling
• Available in all door styles and nishes
• Separate toe kick with vent included
• Stainless steel handles sold separately
• The face plate is modied in eld to accept the respective heat liner used
with the gas grill
• 3/4" All-Weatherboard™ cabinet construction
• Fully integrated back panel for installation
• Includes 4 ‘Sure Level’ polymer legs, shipped loose for eld installation
and leveling
• Available in all door styles and nishes
• Separate toe kick with vent included
• Stainless steel handles sold separately
6 ventilation outlets included to allow the release of
possible heat or gas build-up.
2 in the toe kick panel
2 in the base shelf
2 loose to be used on the exterior of the base
cabinet at the end of a cabinet run. Placement will
be high or low depending on type of gas (LP vs. NG)
6 ventilation outlets included to allow the release of
possible heat or gas build-up.
2 in the toe kick panel
2 in the base shelf
2 loose to be used on the exterior of the base
cabinet at the end of a cabinet run. Placement will
be high or low depending on type of gas (LP vs. NG)
Please Note
All built in grill heads require an insulated jacket. Please
consult your grill manufacturer for the appropriate model.
Please Note
All built in grill heads require an insulated jacket. Please
consult your grill manufacturer for the appropriate model.
Grill cabinets are manufactured with two full upper face plates that will need to be eld modied to accept the heat liner
used with the gas grill. The second matching panel will be shipped loose for ease of modication and installation. It can
be attached with stainless steel screws or a suitable construction grade adhesive. Under no circumstance should a grill be
installed without the appropriate heat liner specied by the manufacturer of the appliance or warranty is invalid.