Instructions / Assembly

37
888-745-0004 · weatherstrong.com ·
ISLAND BACK SIDE BURNER CABINETS
Side Burner Double Door Base
Please Note: All built in side burners require an
insulated jacket. Please consult your side burner
manufacturer for the appropriate model.
Please Note: All built in side burners require an
insulated jacket. Please consult your side burner
manufacturer for the appropriate model.
Side Burner base cabinets with a width of 15” to 24”
include 4 ventilation outlets to allow the release of possible
heat or gas buildup.
1 in the toe kick panel
1 in the base shelf
2 loose, to be used on the exterior of the base cabinet at
the end of a cabinet run. Placement will be high or low
depending on the type of gas (LP vs. NG)
Please Note: Heat Liner must be used with with all SIde Burner and Grill Cabinets
Side Burner base cabinets with a width of 30” include 6
ventilation outlets to allow the release of possible heat or
gas buildup.
2 in the toe kick panel
2 in the base shelf
2 loose, to be used on the exterior of the base cabinet at
the end of a cabinet run. Placement will be high or low
depending on type of gas (LP vs. NG)
Item Number Width Depth Height Back
SBB15LIB 15 27 34.5 Full
SBB15RIB 15 27 34.5 Full
SBB18LIB 18 27 34.5 Full
SBB18RIB 18 27 34.5 Full
SBB21LIB 21 27 34.5 Full
SBB21RIB 21 27 34.5 Full
Item Number Width Depth Height Back
SBB24IB 24 27 34.5 Full
SBB30IB 30 27 34.5 Full
• The face plate is modied in eld to accept the respective
heat liner used with the side burner
• 3/4" All-Weatherboard™ cabinet construction
• Fully integrated back panel for installation
• Includes 4 ‘Sure Level’ polymer legs, shipped
loose for eld installation and leveling
• Available in all door styles and nishes
• Separate toe kick with vent included
• Stainless steel handles sold separately
Side Burner Single Door Base
• The face plate is modied in eld to accept the respective
heat liner used with the side burner
• 3/4" All-Weatherboard™ cabinet construction
• Fully integrated back panel for installation
• Includes 4 ‘Sure Level’ polymer legs, shipped
loose for eld installation and leveling
• Available in all door styles and nishes
• Separate toe kick with vent included
• Stainless steel handles sold separately
IMPORTANT INFORMATION
Grill and side burner cabinets are manufactured with two full upper face plates that will need to be eld modied to
accept the respective heat liner used with the gas grill or side burner.
The second matching panel will be shipped loose for ease of modication and installation. It can be attached with
stainless steel screws or a suitable construction grade adhesive. Under no circumstance should a grill or side burner
be installed without the appropriate heat liner specied by the manufacturer of the appliance.
11⅞"
34½"
Width
27"
11⅞"
34½"
Width
27"