Instructions / Assembly

2”
inch
3
16
inch
3
16
3
2
4
x
inch Washer
1
4
1. Each Wall Cabinet requires 4 wall anchors (2 top, 2 bottom)
2. Screws should be placed in each corner approximatley 2" from the end panels.
3. Pre-drill the pilot holes before you place the cabinet against the wall, with a standard 3/36"
drill bit.
4. Then put the cabinet in place. In each corner use the 3/16" Tapcon bit thru the pilot holes to
create starter holes into the concrete block, for the Tapcon anchors.
5. Remove the cabinet to complete drilling the pilot holes into the concrete block. When
complete, place the cabinet aginst the wall
6. Once you confirm the cabinet is level and square, use Tapcon® 410 Stainless Steel 3/16" x 2
3/4" fasteners, with a 1/4 stainless steel washer to secure the cabinet to the wall.
Anchoring
to Concrete
Block Walls
WEATHERSTRONG.COM